This browser is no longer supported. Upgrade to Microsoft Edge or switch to a supported browser, like Chrome, Safari, or Firefox, to explore the MW Components website.

We're sorry for the inconvenience.

Products > Springs

Disc Springs / Washers

MW Components produces a variety of stock and custom disc springs and washers, including contact disc springs, flat washers, slotted disc springs, serrated disc springs, Belleville washers, and many others.

Belleville washers, also called cupped spring washers, conical washers, or Belleville disc springs, have a conical shell and are shaped like a washer but with added height. Their unique shape allows them to support heavy loads with comparatively minor deflections. They are also used to replace springs in specific applications. Washers and disc springs are used in multiple use cases. Some examples are valve actuator assemblies, fail-safe breaking, and consumer power tools.

Shop Stock Disc Springs Request a Quote


Custom Disc Springs & Washers

For almost 50 years, MW has been a leader in custom precision disc springs, and washers, having designed and manufactured thousands of custom disc springs, including custom Belleville washers, for a range of unique applications.

Contact us today to request a quote or learn more about the custom spring manufacturing process.

Request a Custom Quote

Washer & Disc Spring Manufacturing

Put our experience to work for you. If your application needs an engineered solution due to special environmental conditions, tight space requirements, or service life expectations, we are here to help. Together, we will optimize the performance of your system by providing insight into manufacturing methods that minimize your cost.

In addition to custom designs, we offer special packaging of disc springs including stacking, to make your final assembly operation more efficient.

Related Manufacturing Services

We have decades of experience in manufacturing washers and disc springs and have access to both industry-standard and cutting-edge manufacturing technology. Below are a few examples of manufacturing services that you’ll have access to within our facilities.

Finishing Services

From heat-treating and precision cutting to pre-stacking and packaging—we work with your team to provide the finishing and packing services that your products need to perform their best.

  • Heat Treatments
  • Kitting
  • Laser Etching
  • Packaging

Quality Materials

We are constantly testing new materials, and as a result we offer superior metallurgical capabilities and quality standard and specialty materials.

  • Alloy Steels
  • Carbon Steels
  • Stainless Steel Alloys
  • Tool Steels

About Disc Springs & Washers


Belleville washers consist primarily of a convex disc supported at the outer periphery by one force and an opposing force on the center of the disc, whereas other styles of disc springs can be flat, waved, or curved and may include slotting, serrated insets, or other configurations, depending on their recommended use. Belleville washers, in particular, can be used singly, or in stacks, to achieve a desired load and travel.

Advantages & Options

The advantage of a disc spring is that it generates high force in a very short spring length and with minimal movement when compressed. All our disc springs are subject to exacting manufacturing and quality control standards. All discs are preset so that they will not significantly relax under load over time. We also offer pre-stressed disc springs specifically sized for use with bolts.

Stacking Washers & Disc Springs

When to Stack Disc Springs

Belleville washers and other disc spring styles can be used singly or in stacks to achieve a desired load and travel. In general, they function best under conditions requiring a very high load in confined space or short travel. Under these constraints, it is often not practical or even possible to use a coil spring. In disc spring stacks, particularly those with parallel units, friction should be considered. Sliding friction is created at the disc’s adjoining, moving surfaces. As a result, the deflection which occurs when loading a stack of discs will lag as the stack is unloaded (hysteresis). This characteristic may be taken advantage of in shock or oscillatory-loaded systems needing damping.

Parallel Stack

If you stack 6 discs in parallel, you gain 6 times the load capacity of a single disc, but your maximum deflection is that of a single disc. For example, using part# CDM-63203, you would achieve a total load of 222 lbs (37×6), an O.H. .078″, but a deflection of .006″.

Series Stack

If you stack 5 discs in a series, you achieve 5 times the deflection of one disc, but the same load as a single disc. For example, using part# CDM-63203, you would achieve a total load of 37 lbs, an O.H. of .089″, and a total deflection of .030″.

Mixed Stacking – Parallel & Series

Belleville washers stacked in series and parallel combinations can be arranged to produce almost any load-vs.-deflection trend that you need (linear, progressive, regressive, etc.)

Quality Standards & Certifications

At MW, we pride ourselves on creating quality products that meet or exceed industry standards. Not only do our facilities perform rigorous quality assurance testing to your specified ranges, but we also maintain several key certifications to ensure that only the best products are shipped to you.

View all available certifications here.

Disc Springs / Washers Tools & Resources