This browser is no longer supported. Upgrade to Microsoft Edge or switch to a supported browser, like Chrome, Safari, or Firefox, to explore the MW Components website.

We're sorry for the inconvenience.

Servometer

SSC-440-4mm-.125 - 1.093 Inch 303 Stainless Steel Ends / FlexNickel Bellows Flexible Shaft Coupling

Inventory Status
Low Stock

Machined coupling manufactured from 303 Stainless Steel Ends / FlexNickel Bellows with integralClamp end attachments. This 1.093 Inch flexible shaft coupling has a 0.5 Inch O.D. and 4 Millimeter and 0.125 Inch bores.

Unit System
View Spec Sheet
Specs (in standard)
Label Value
Angular Misalignment 9 deg
Axial Motion 0.059 in
Bellows SC-10
Bore Size 0.1575 in
Bore Size 2 0.125 in
Brand Servometer
Display Name SSC-440-4mm-.125
End Attachment Solder
End Length 0.3 in
End Type Integral Clamp
Finish None
Hub 050-33499
Material 303 Stainless Steel Ends / FlexNickel Bellows
Model Number SSC-440
Outside Diameter 0.5 in
Overall Length 1.093 in
Parallel Offset 0.018 in
Rated Torque 75 in-oz
SKU SSC-440-4mm-.125
Screw Size M2
Side Thrust 1.13 oz / 0.001"
Static Torsional Stiffness 91 Nm / Rad
Wind Up 16 Arc Sec / in-oz
Specs (in metric)
Label Value
Angular Misalignment 9 deg
Axial Motion 1.5 mm
Bellows SC-10
Bore Size 4 mm
Bore Size 2 3.18 mm
Brand Servometer
Display Name SSC-440-4mm-.125
End Attachment Solder
End Length 7.62 mm
End Type Integral Clamp
Finish None
Hub 050-33499
Material 303 Stainless Steel Ends / FlexNickel Bellows
Model Number SSC-440
Outside Diameter 12.7 mm
Overall Length 27.76 mm
Parallel Offset 0.46 mm
Rated Torque 75
SKU SSC-440-4mm-.125
Screw Size M2
Side Thrust 1.13
Static Torsional Stiffness 91
Wind Up 16

You May Also Like

Related Resources

View More Resources