This browser is no longer supported. Upgrade to Microsoft Edge or switch to a supported browser, like Chrome, Safari, or Firefox, to explore the MW Components website.

We're sorry for the inconvenience.

HR075-8-4 - 0.75 Inch 17-4 PH Stainless Steel Flexible Shaft Coupling

Machined coupling manufactured from 17-4 PH Stainless Steel with Set Screw end attachments. This 0.75 Inch flexible shaft coupling has a 0.75 Inch O.D. and 0.125 Inch and 0.25 Inch bores.

Unit System
View Spec Sheet
Specs (in standard)
Label Value
Angular Misalignment 5 deg
Axial Motion 0.01 in
Bore Size 0.125 in
Bore Size 2 0.25 in
Brand Helical Products
Center Line 0.09 in
Display Name HR075-8-4
End Type Set Screw
Finish None
Hex Size 0.1094 in
Inertia 1.5 lbin/sec sq
Length 0.75 in
Material 17-4 PH Stainless Steel
Max Torque 17 lbs/in
Model Number HR075-8-4
Non-Reversing Torque 8.5 lbs/in
Operating Temperature 600 F
Outside Diameter 0.75 in
Parallel Offset 0.01 in
Rate (Rotational) 0.25 lbf/deg
Rated Speed 10000 rpm
Reversing Torque 4.3 lbs/in
SKU HR075-8-4
Screw Size 6-32
Seating Torque 8 lbs/in
Series HR
Specs (in metric)
Label Value
Angular Misalignment 5 deg
Axial Motion 0.25 mm
Bore Size 3.18 mm
Bore Size 2 6.35 mm
Brand Helical Products
Center Line 2.29 mm
Display Name HR075-8-4
End Type Set Screw
Finish None
Hex Size 2.78 mm
Inertia 1.73 kgcm/sec sq
Length 19.05 mm
Material 17-4 PH Stainless Steel
Max Torque 2.98 N-mm
Model Number HR075-8-4
Non-Reversing Torque 1.49 N-mm
Operating Temperature 315.56 C
Outside Diameter 19.05 mm
Parallel Offset 0.25 mm
Rate (Rotational) 1.11 N/deg
Rated Speed 10000 rpm
Reversing Torque 0.75 N-mm
SKU HR075-8-4
Screw Size 6-32
Seating Torque 1.4 N-mm
Series HR

You May Also Like

Related Resources

View More Resources